SRM1415AL

Metric Short Locking Inserts

Locking Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM14

SRM1415AL is a metric short locking insert for reinforced MJ14X1.5 threads in Al/Mg. 17-4PH stainless; installation data includes 15.17-15.32 mm tap drill and 24,1 mm min full-thread depth. This is an old Anemo part. Please use CSSLM14X1.5

We can offer you the part SRM1415AL with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM1415AL - Metric Short Locking Inserts
SRM1415AL - Metric Short Locking Inserts
SRM1415AL - Metric Short Locking Inserts
SRM1415AL - Metric Short Locking Inserts
 How to install a Crownsert?
SRM1415AL - Metric Short Locking Inserts
SRM1415AL - Metric Short Locking Inserts
SRM1415AL - Metric Short Locking Inserts

Thread & Dimensions

Thread Ø T1 / class MJ14X1.5
Thread Ø T2 / class M16X1.0
Shear engagement (mm²) 659
A Ø 14,37
B RAD min 6,57
C (±0.20) 4,65
D ref 3,6
E min 2,50
L (±0.3) 23,1
Through-hole preparation Min. full THD depth 24,1; Min. full depth 29,6
Blind-hole preparation Min. full THD depth 24,1; Min. full depth 28,2
SRM1415AL schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTLM14
Step drill part number CSD1532
Tap through tool part number TTIM16
Blind tap tool part number TBIM16
Removal tool part number CSRTM14
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE