SRM1215A

Metric Short Standard Inserts

Standard Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM12

SRM1215A is a metric short standard insert for reinforced MJ12X1.5 threads in Al/Mg. 17-4PH stainless; installation data includes 13.17-13.32 mm tap drill and 20,9 mm min full-thread depth. This is an old Anemo part. Please use CSSM12X1.5

We can offer you the part SRM1215A with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM1215A - Metric Short Standard Inserts
SRM1215A - Metric Short Standard Inserts
SRM1215A - Metric Short Standard Inserts
SRM1215A - Metric Short Standard Inserts
 How to install a Crownsert?
SRM1215A - Metric Short Standard Inserts
SRM1215A - Metric Short Standard Inserts
SRM1215A - Metric Short Standard Inserts

Thread & Dimensions

Thread Ø T1 / class MJ12X1.5
Thread Ø T2 / class M14X1.0
L (±0.3) 19,90
A diameter 12,37
B diameter min 11,43
C (±0.20) 4,65
D 3,5
E min 3,2
Through-hole preparation Min. full THD depth 20,9; Min. full depth 26,4
Blind-hole preparation Min. full THD depth 20,9; Min. full depth 25,0
SRM1215A schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTM12
Step drill part number CSD1332
Tap through tool part number TTIM14
Blind tap tool part number TBIM14
Removal tool part number CSRTM12
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE