SRM1012AL

Metric Short Locking Inserts

Locking Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM10

SRM1012AL is a metric short locking insert in 17-4PH stainless, with MJ10X1.25 internal and M12X1.0 external threads. Prepared for 11.16-11.29 mm tap drill and installed with CSTLM10. This is an old Anemo part. Please use CSSLM10X1.25

We can offer you the part SRM1012AL with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM1012AL - Metric Short Locking Inserts
SRM1012AL - Metric Short Locking Inserts
SRM1012AL - Metric Short Locking Inserts
SRM1012AL - Metric Short Locking Inserts
 How to install a Crownsert?
SRM1012AL - Metric Short Locking Inserts
SRM1012AL - Metric Short Locking Inserts
SRM1012AL - Metric Short Locking Inserts

Thread & Dimensions

Thread Ø T1 / class MJ10X1.25
Thread Ø T2 / class M12X1.0
A Ø 10,37
B RAD min 4,57
C (±0.20) 4,65
D ref 3,3
E min 2,50
L (±0.3) 16,2
Through-hole preparation Min. full THD depth 17,2; Min. full depth 22,7
Blind-hole preparation Min. full THD depth 17,2; Min. full depth 21,3
SRM1012AL schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTLM10
Step drill part number CSD1129
Tap through tool part number TTIM12
Blind tap tool part number TBIM12
Removal tool part number CSRTM10
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE