SRM0810AL

Metric Short Locking Inserts

Locking Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM8

SRM0810AL is a metric short locking insert in 17-4PH stainless, with MJ8X1.0 internal and M10X1.0 external threads. Prepared for 9.11-9.24 mm tap drill and installed with CSTLM8. This is an old Anemo part. Please use CSSLM8X1.0

We can offer you the part SRM0810AL with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM0810AL - Metric Short Locking Inserts
SRM0810AL - Metric Short Locking Inserts
SRM0810AL - Metric Short Locking Inserts
SRM0810AL - Metric Short Locking Inserts
 How to install a Crownsert?
SRM0810AL - Metric Short Locking Inserts
SRM0810AL - Metric Short Locking Inserts
SRM0810AL - Metric Short Locking Inserts

Thread & Dimensions

Thread Ø T1 / class MJ8X1.0
Thread Ø T2 / class M10X1.0
A Ø 8,32
B RAD min 3,64
C (±0.20) 3,95
D ref 2,9
E min 2,00
L (±0.3) 12,8
Through-hole preparation Min. full THD depth 13,8; Min. full depth 19,3
Blind-hole preparation Min. full THD depth 13,8; Min. full depth 17,9
SRM0810AL schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTLM8
Step drill part number CSD0924
Tap through tool part number TTIM10
Blind tap tool part number TBIM10
Removal tool part number CSRTM8
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE