SRM0810A

Metric Short Standard Inserts

Standard Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM8

SRM0810A is a metric short standard insert for reinforced MJ8X1.0 threads in Al/Mg. 17-4PH stainless; installation data includes 9.11-9.24 mm tap drill and 13,8 mm min full-thread depth. This is an old Anemo part. Please use CSSM8X1.0

We can offer you the part SRM0810A with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM0810A - Metric Short Standard Inserts
SRM0810A - Metric Short Standard Inserts
SRM0810A - Metric Short Standard Inserts
SRM0810A - Metric Short Standard Inserts
 How to install a Crownsert?
SRM0810A - Metric Short Standard Inserts
SRM0810A - Metric Short Standard Inserts
SRM0810A - Metric Short Standard Inserts

Thread & Dimensions

Thread Ø T1 / class MJ8X1.0
Thread Ø T2 / class M10X1.0
L (±0.3) 12,80
A diameter 8,32
B diameter min 7,58
C (±0.20) 3,95
D 2,9
E min 2,7
Through-hole preparation Min. full THD depth 13,8; Min. full depth 19,3
Blind-hole preparation Min. full THD depth 13,8; Min. full depth 17,9
SRM0810A schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTM8
Step drill part number CSD0924
Tap through tool part number TTIM10
Blind tap tool part number TBIM10
Removal tool part number CSRTM8
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE