SRM0710AL0036

Metric Short Locking Inserts

Locking Type / AD / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM7

SRM0710AL0036 is a metric short locking insert for reinforced MJ7X1.0 threads in Al/Mg. 4130 alloy steel; installation data includes 8.10-8.20 mm tap drill and 11,9 mm min full-thread depth. This is an old Anemo part. Please use CSSLM7X1.0AD

We can offer you the part SRM0710AL0036 with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM0710AL0036 - Metric Short Locking Inserts
SRM0710AL0036 - Metric Short Locking Inserts
SRM0710AL0036 - Metric Short Locking Inserts
SRM0710AL0036 - Metric Short Locking Inserts
 How to install a Crownsert?
SRM0710AL0036 - Metric Short Locking Inserts
SRM0710AL0036 - Metric Short Locking Inserts
SRM0710AL0036 - Metric Short Locking Inserts

Thread & Dimensions

Thread Ø T1 / class MJ7X1.0
Thread Ø T2 / class M9X1.0
A Ø 7,29
B RAD min 3,22
C (±0.20) 3,55
D ref 2,7
E min 1,75
L (±0.3) 10,9
Through-hole preparation Min. full THD depth 11,9; Min. full depth 17,4
Blind-hole preparation Min. full THD depth 11,9; Min. full depth 16,0
SRM0710AL0036 schematic

Material & Finish

Material Alloy Steel 4130 per AMS 6370
Finish Cadmium Plated per AMS-QQ-P-416 Type 2, Class 3 & SFL per SAE AS5272
Temperature range Up to 450+°F
Heat treat RC 25-34
Magnetic YES

Tooling & Preparation

Hand-Installation tool part number CSTLM7
Step drill part number CSD0820
Tap through tool part number TTIM9
Blind tap tool part number TBIM9
Removal tool part number CSRTM7
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE