SRM0710AL

Metric Short Locking Inserts

Locking Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM7

SRM0710AL is a metric short locking insert for reinforced MJ7X1.0 threads in Al/Mg. 17-4PH stainless; installation data includes 8.10-8.20 mm tap drill and 11,9 mm min full-thread depth. This is an old Anemo part. Please use CSSLM7X1.0

We can offer you the part SRM0710AL with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

SRM0710AL - Metric Short Locking Inserts
SRM0710AL - Metric Short Locking Inserts
SRM0710AL - Metric Short Locking Inserts
SRM0710AL - Metric Short Locking Inserts
 How to install a Crownsert?
SRM0710AL - Metric Short Locking Inserts
SRM0710AL - Metric Short Locking Inserts
SRM0710AL - Metric Short Locking Inserts

Thread & Dimensions

Thread Ø T1 / class MJ7X1.0
Thread Ø T2 / class M9X1.0
A Ø 7,29
B RAD min 3,22
C (±0.20) 3,55
D ref 2,7
E min 1,75
L (±0.3) 10,9
Through-hole preparation Min. full THD depth 11,9; Min. full depth 17,4
Blind-hole preparation Min. full THD depth 11,9; Min. full depth 16,0
SRM0710AL schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-Installation tool part number CSTLM7
Step drill part number CSD0820
Tap through tool part number TTIM9
Blind tap tool part number TBIM9
Removal tool part number CSRTM7
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE