CSSLM10X1.5

Metric Short Locking Crownserts

CSSML Series / Locking Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM10

CSSLM10X1.5 CSSLM Series is a locking metric Crownserts® threaded insert made from 17-4PH stainless steel. It reinforces MJ10X1.5 threads in lightweight materials and uses M12X1.0 installation threads.

Crownserts can offer you the part CSSLM10X1.5 with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

CSSLM10X1.5 - Metric Short Locking Crownserts
CSSLM10X1.5 - Metric Short Locking Crownserts
CSSLM10X1.5 - Metric Short Locking Crownserts
CSSLM10X1.5 - Metric Short Locking Crownserts
 How to install a Crownsert?
CSSLM10X1.5 - Metric Short Locking Crownserts
CSSLM10X1.5 - Metric Short Locking Crownserts
CSSLM10X1.5 - Metric Short Locking Crownserts

Thread & Dimensions

Thread Ø T1 / class MJ10X1.5
Thread Ø T2 / class M12X1.0
Shear engagement (mm²) 321,3
A Ø 10,37
B RAD min 4,57
C (±0.20) 4,65
D ref 3,3
E min 2,50
L (±0.3) 16,2
Through-hole preparation Min. full THD depth 17,2; Min. full depth 22,7
Blind-hole preparation Min. full THD depth 17,2; Min. full depth 21,3
CSSLM10X1.5 schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-installation tool part number CSTLM10
Step drill part number CSD1129
Tap through tool part number TTIM12
Blind tap tool part number TBIM12
Removal tool part number CSRTM10
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE

Crownserts is offering part CSSLM10X1.5 as factory new.