CSSM8X1.25

Metric Short Standard Crownserts

CSSM Series / Standard Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM8

CSSM8X1.25 is a metric short standard crownsert in 17-4PH stainless steel, with MJ8X1.25 internal and M10X1.0 external threads. Prepared for 9.11-9.24 mm tap drill and installed with CSTM8

Crownserts can offer you the part CSSM8X1.25 with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

CSSM8X1.25 - Metric Short Standard Crownserts
CSSM8X1.25 - Metric Short Standard Crownserts
CSSM8X1.25 - Metric Short Standard Crownserts
CSSM8X1.25 - Metric Short Standard Crownserts
 How to install a Crownsert?
CSSM8X1.25 - Metric Short Standard Crownserts
CSSM8X1.25 - Metric Short Standard Crownserts
CSSM8X1.25 - Metric Short Standard Crownserts

Thread & Dimensions

Thread Ø T1 / class MJ8X1.25
Thread Ø T2 / class M10X1.0
Shear engagement (mm²) 198,1
L (±0.3) 12,80
A diameter 8,32
B diameter min 7,58
C (±0.20) 3,95
D 2,9
E min 2,7
Through-hole preparation Min. full THD depth 13,8; Min. full depth 19,3
Blind-hole preparation Min. full THD depth 13,8; Min. full depth 17,9
CSSM8X1.25 schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-installation tool part number CSTLM8
Step drill part number CSD0924
Tap through tool part number TTIM10
Blind tap tool part number TBIM10
Removal tool part number CSRTM8
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE

Crownserts is offering part CSSM8X1.25 as factory new.