CSSM14X1.5

Metric Short Standard Crownserts

CSSM Series / Standard Type / 17-4PH / Short

Installed using the Crownserts Hand-Installation Tool:  CSTLM14

CSSM14X1.5 CSSM Series is a standard metric Crownserts® threaded insert made from 17-4PH stainless steel. It reinforces MJ14X1.5 threads in lightweight materials and uses M16X1.0 installation threads.

Crownserts can offer you the part CSSM14X1.5 with Certificate of Quality, Certificate of Conformity and Certificate of Origin on request.

CSSM14X1.5 - Metric Short Standard Crownserts
CSSM14X1.5 - Metric Short Standard Crownserts
CSSM14X1.5 - Metric Short Standard Crownserts
CSSM14X1.5 - Metric Short Standard Crownserts
 How to install a Crownsert?
CSSM14X1.5 - Metric Short Standard Crownserts
CSSM14X1.5 - Metric Short Standard Crownserts
CSSM14X1.5 - Metric Short Standard Crownserts

Thread & Dimensions

Thread Ø T1 / class MJ14X1.5
Thread Ø T2 / class M16X1.0
Shear engagement (mm²) 659
L (±0.3) 23,10
A diameter 14,37
B diameter min 13,30
C (±0.20) 4,65
D 3,6
E min 3,2
Through-hole preparation Min. full THD depth 24,1; Min. full depth 29,6
Blind-hole preparation Min. full THD depth 24,1; Min. full depth 28,2
CSSM14X1.5 schematic

Material & Finish

Material 17-4PH, Cond H1025 per AMS 5643
Finish PASSIVATED per AMS 2700 & SFL coated per SAE AS5272
Temperature range -110°/+650°F
Heat treat RC 35-42
Magnetic YES
Material note Standard material code; no suffix added to the part number.

Tooling & Preparation

Hand-installation tool part number CSTM14
Step drill part number CSD1532
Tap through tool part number TTIM16
Blind tap tool part number TBIM16
Removal tool part number CSRTM14
 REQUEST A QUOTE  DOWNLOAD OUR CATALOGUE

Crownserts is offering part CSSM14X1.5 as factory new.